List of Articles پتروفیزیک

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Al Khalij field in Qatar, and extension toward Reshadat Oil Field, in the Persian Gulf
  Ali reza Bashari
  20.1001.1.22518738.1395.6.11.4.7
  Alkhalij field located offshore Qatar , was discovered in 1991 and put into production in 1997. The field is original in many aspects. it is one of the few carbonate reservoir with stratigraphic closure, the oil is being trapped in upper part of a monocline due to a l More

  Alkhalij field located offshore Qatar , was discovered in 1991 and put into production in 1997. The field is original in many aspects. it is one of the few carbonate reservoir with stratigraphic closure, the oil is being trapped in upper part of a monocline due to a lateral variation in reservoir facies. In addition, the reservoir lies within the capillary transition zone and consists of a succession of highly conductive oil bearing layers ( drains) in between matrix layers of poor permeability. High- resolution 3D seismic has revealed additional area developed, which were previously considered to be uneconomic. Resent 4D seimic pilot has given encouraging result to utilize Seismic Technologies to analyse the evolution of the Al Khalij oilfield over time. Studies shows, this field possibly extended toward Reshdat oil field. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Modeling of Horizontal Extent of Pay zone Layer on the Basis of Petrophysical Parameters Variations Using Indicator Kriging Method in one of the Southwest Iranian Oil Fields
  Farnaz Saberi Farhad Mohammad Torab Kioumars Taheri
  20.1001.1.22518738.1398.9.17.3.9
  Determining the position of the production zone is one of the best ways to reduce drilling costs as well as quick access to the reservoir and optimal production of hydrocarbon resources. The purpose of this study, is to estimate the porosity, water saturation and thickn More

  Determining the position of the production zone is one of the best ways to reduce drilling costs as well as quick access to the reservoir and optimal production of hydrocarbon resources. The purpose of this study, is to estimate the porosity, water saturation and thickness of an oil field in Iran’s southwestern Basin , and ultimately to reach the production zone. Therefore, according to the data obtained from 76 wells of this field, variation of reservoir petrophysical parameters were modeled with variogram operation and using Geostatistical methods. By using ordinary Kriging method, the values of the parameters were estimated in the whole field. Subsequently, by using the indicator kriging method, the field boundaries were separated in order to obtain the exact area of the oil zone and the volume of oil in place and finally by considering the 80% probability level, The definite boundary of the presence of the production zone was determined in the block model and In this zone the volume of reservoir’s hydrocarbon was estimated about 147/5 million cubic foot. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Integration of petrophysical and Seismic data: an Attempt to Geological model, Ilam reservoir oil field, Sirri District , in the Persian Gulf.
  Alireza Bashari
  10.52547/ispg.39981.11.21.98
  20.1001.1.22518738.1400.11.21.6.4
  Ilam Formation is deposited at the late Cretaceous (Santonian) in a neritic/pelagic environment. Following the Ilam deposition, a general deepening has occurred and the Gurpi formation (shaly layer) was deposited. Ilam has thickness variation between 75-110m and st More

  Ilam Formation is deposited at the late Cretaceous (Santonian) in a neritic/pelagic environment. Following the Ilam deposition, a general deepening has occurred and the Gurpi formation (shaly layer) was deposited. Ilam has thickness variation between 75-110m and structure has created as a result of upward movement of deep seated salt. Ilam reservoir in this field is regarded as a secondary hydrocarbon potential, and since now, no oil has been produced from this horizon. petrophysical and Seismic interpretation has been done for the Ilam reservoir, the geological models (structural and property models) are generated, with both deterministic and stochastic approaches. The seismic attributes as secondary variables, improved the kriging and Sequential Gaussian Simulation (SGS) algorithm results for modeling of Ilam. This study reveals that Water Saturation is generally high, indicating that Ilam reservoir has low hydrocarbon potential, within the five reservoir potential zones, the zone 5 indicated a good original oil in place potential, especially in the western and central parts of the field. Manuscript profile